ALL RIGHTS RESERVED
589 Rappahannock Drive WhiteStone Va 22578
Tel (804) 435-5522 Toll Free (866) 244-1578 Fax (703) 991-7133
www.coffeelabequipment.com
MOISTURE, PARTICLE CHARACTERIZATION, COLOR, AND SAMPLING
These hand held sample dividers will subdivide material samples into two smaller portions by a single pass or further subdivisions can be attained by multiple passes.
The important feature of each sample divider is that each
subdivision retains the characteristics of the original sample.
Based on the recommendations of BS 5309 and BS 3406/1.
Produced in stainless steel with slot widths of 12 mm.
Includes main body, two pans,
and one scoop. Made from high
quality stainless steel.
The scoop lays inside the hopper,
and when removed, drops the
grains on to the chutes.
Hopper Dimensions approximately
430 mm x 120 mm
Weight 15 lbs Packaged 15" x 22" x 18"
Number of chutes 24
Width of chutes 12 mm
Hopper Size 430 mm x 120 mm
No of pans 2
Instructions: Place the scoop in the hopper in such a way
that it is at a right angle from the hopper, by holding the
handle of the scoop. The scoop will rest in the middle of
the hopper.
Pour the sample into the hopper, and lift the scoop.
The grain is divided into two equal divisions, and
discharged into separate pans.
